Search

• Roving
  • Gun Roving
  • Corrugated Sheet Roving
  • Filament Winding Roving
  • SMC Roving
  • Pultrusion Roving
  • Gypsum Roving
  • Alkali Resistant Roving
  • Direct Roving
  • Fiberglass Yarn
  • ECR Fiberglass Roving
• Chopped Strands
  • Thermoplastics
  • Thermoset (BMC)
  • Wet Chopped Strands
  • Alkali Resistant
  • Gypsum
  • High Silica
  • S-Glass
• Mats
  • Powder CSM
  • Emulsion CSM
  • Stitch Bound CSM
  • Continuous Filament Mat
  • ECR Chopped Strand Mat
• Woven & Nets
  • Woven Roving
  • Abrasive Reinforcement Discs
  • Abrasive Reinforcement Mesh
• Tissues
  • Fiberglass Tissue
  • Black Tissue
  • Roofing Tissue
  • Pipe Wrap Tissue
  • FRP Surface Tissue
• Mesh & Scrim
  • Alkali Resistant Mesh
  • Self-Adhesive Drywall Tape
  • Insect Screen
  • Fiberglass Scrim
  • Fiberglass Geogrid
  • Fiberglass Mesh Wall Patch
• FRP Products
  • FRP Gridmesh Grating Page 1/2
  • FRP Gridmesh Grating Page 2/2
  • FRP Handrails and Ladders
  • FRP Gridmesh Grating T-Bar Series
  • FRP Gridmesh Grating I-Bar Series
  • FRP Profiles
  • Fiberglass Camouflage Sheets
• Filtrations & Insulation
  • PCB Fabrics
  • Alumiunium Filtration Fabric
  • High Silica Fabric
    • High Silica Yarn & Filter Mesh
  • High Silica Chopped Strands
  • High Silica Insulation
  • Fiberglass Needled Mat
  • Dust Filtration Fabric
  • Industrial Fabric
  • Fire Resistant Fiberglass Rigid Board
• Special Products
  • 3-D Fiberglass Sandwich Woven Fabrics
  • Texturized Yarn
  • S-Glass Materials
  • Silicone Fiberglass Fabric
  • Basalt Fiber
  • Carbon Fiber
  • Multiaxial Fabric

FRP Gridmesh Grating 1/2 Rectangular FRP Grating - Covered FRP Grating - Fiberglass FRP Plate FRP Stair Treads - Stainless Steel Hold-Down Clips

FRP Gridmesh Grating 1/2 | FRP Gridmesh Grating 2/2 | FRP Handrails and Ladders |
FRP Gridmesh Grating T-Bar Series | FRP Gridmesh Grating I-Bar Series | FRP Profiles |
Fiberglass Camouflage Sheets | Fiberglass Re-Bar |
Fiberglass reinforced plastic (FRP) grating have been engineered not only for high strength, but also to overcome corrosion problems found in chemical and mining industries where corrosive products are used. These are areas where metal grating rapidly deteriorates or creates a constant maintenance problem. FRP Grating is a cost-effective solution with the following characteristics

Corrosion Resistant. Easily outperforms metal grating.
Fire Resistant.
Non-sparking. Ideal where combustible gas or materials are present.
Non-conductive. Good where electric hazards are present.
Non-magnetic. Use in sensitive locations where the magnetic properties of metal grating are proven to be unfavourable.
Low thermal conductivity. An excellent insulator and safeguard against inadvertent skin-contact with extreme temperature surfaces.
Good impact resistance. Allows repeated deflections without being permanently deformed.
Slip resistant (with concave bars and grit-top surface available)
Maintenance freedom!
Light in weight.
Easy installation. Cut and shape easily with hand tools
Now made to ISO9001 International Quality Standard
Dangerous Goods Store FRP Grating. Now all FRP grating can be supplied with a molded-on graphite surface 3mm (1/8-inch) thick. A wire can be applied from this surface to the ground so as to eliminate the danger of static electricity.

Rectangular FRP Grating [Jump to top]
Fiberglass rectangular FRP grating is a great reinforced composite molded grating with concave non-slip top bars 

• Uniform placement of continuous glass strands during manufacture provides superior strength.

• A good choice for walkway and trench covers in many industrial applications.

Covered FRP Grating  [Jump to top]
All types of FRP grating are now available with molded-on covers

• Cover thickness 3mm (1/8") and 5mm (1/4").

• Covers are laminated on to the top surface of the FRP grating.

• The strength of the grating provides excellent support to the laminated light weight FRP sheet.

• A high strength and light weight composite floor.

• Top surface supplied with or without grit-top non slip surface.

Fiberglass FRP Plate  [Jump to top]
Fiberglass plate can also be supplied and provides a durable and cost-effective structural panel that can be used for flooring or walls

• Plate is manufactured by building up multiple layers of fiberglass reinforcement with specially formulated resins resulting in a solid composite panel.

• Excellent bi-directional strength and corrosion resistance.

• Ideal as flooring and insulation over structural members or existing grating. Provides a solid walkway.

• Plate can be bolted directly to structural beams and used as a wall panel resistant to corrosive splash.

Fiberglass FRP Plate Sizes

• Standard panels size 1220mm x 3660mm (4'x12')

• Thickness 3mm to 19mm (1/8" to 3/4")

• Fire retardant ASTM E-84

• Molded

FRP Stair Treads  [Jump to top]
Fiberglass reinforced plastic stair treads are made in convenient sizes with the following special safety features

• Standard non-slip concave surface bars

• Optional grit-top surface treatment available on stair treads

• Stair treads also available with gritted nosing applied (as shown in picture)

• Available in three resin systems: vinylester, isophthalic or orthophthalic

• Stair tread panels available in larger sizes than the standard 305mm (") size. Ask us for details

• Optional stainless steel fixing clips with bolts/nuts available

• A good choice for stairs where superior strength and maintenance freedom is required

• Good variety of colors available